Signode BXT2-19

Signode BXT2-19

The Signode BXT2-19 is a battery powered combination tool designed for running poly straps of width 5/8” and 3/4”. It runs in both fully-automatic and semi-automatic modes and accepts both polypropylene and polyester straps. It is one of the fastest tools currently available in the market. You can easily and quickly switch between the straps by changing the guides. This lightweight tool weighs just 9.3 lbs and pulls up to 880 lbs of tension on the strap.

Technical Specifications

The key technical aspects of the Signode BXT2-19 are as following:

  • Strapping: Polyester & polypropylene strapping of width 5/8” to 3/4”
  • Weight: 9.3 lbs
  • Tension: Soft Mode – 88 lbs to 350 lbs & Normal Mode – 260 lbs to 880 lbs

Using the Signode BXT2-19

Once the operator has set the tension, the battery operated tool will pull the plastic strapping to the set level. It will then weld and cut it. There is a count down to zero before the tool can be removed. This ensures that the battery tool is removed only when the weld has cooled down. The BXT2-19 can be used for both light and heavy-duty applications. It can pull anything from just 88 lbs to ten times as much, making it a highly versatile tool.


  • Ergonomic design and two-button mode help in making strapping applications easy and quick
  • The light weight and ergonomic design further help in reducing operator fatigue
  • The automatic mode helps ensure faster and easier operations with one-button operation
  • The BXT2-19 can run both polyester and polypropylene strapping, making it a highly versatile tool
  • It features latest BOSCH battery design that minimizes contact damage
  • The latest brushless motor minimizes wear and extends the tool’s life

Repair & Accessories

Signode BXT2-19 tool repair services are available from factory-certified technicians. If the tool needs maintenance or repair in the future, you can avail repair services with quick turnaround.

All the accessories for the BXT2-19 are easily available for ordering separately. The right accessory can further help in improving the battery tool’s performance and overall productivity.

The Signode Battery powered tools unique design gives it an edge over the competition. There is no risk of the tool tipping during operation because it offers a very tight grip. It is also lightweight and well balanced so that operator can easily hold it in one hand. The BXT2-19 can be used in different strapping positions and with irregular-shaped, round, and small-interface loads with utmost ease.

Signode Grip Pack 114 Sealer

Signode Grip Pack 114 Sealer

The Signode Grip Pack 114 Sealer is a battery-powered steel strapping sealer, the first of its kind designed for accepting high-tensile steel straps of width 1-1/4”. This is a lightweight, easy-to-use battery tool that can complete more than 200 cycles per charge. It is designed to increase speed and productivity in heavy-duty strapping applications.

Technical Specifications

The main technical specifications of the Signode Grip Pack 114 are as following:

  • Strapping Type: Steel strapping
  • Strapping Dimensions: 3/4” (19mm) or 1-1/4” (32mm) width & 0.025” (0.64mm) to 0.031” (0.80mm) thickness
  • Weight: 8 lbs or 3.6 kg

Using this steel strapping sealer is easy and quick. Place the tool over the seal and pull the trigger. It will smoothly and instantly seal the joint. It features a special sensor for detecting the steel strap and this helps ensure that there is no misfire. The Grip Pack 114 sealer weighs just 8 lbs and is perfect for mobile strapping applications.

This sealer is designed for use with the grippack 114 Tensioner. Together, these battery tools allow you to complete heavy-duty steel strapping applications without having to use heavy pneumatic tools that are difficult to transport. It helps in increasing performance without having to bear the high cost of air generation. It also provides higher consistency compared to pneumatic-powered tools.

This sealer is designed for use with one hand. It features single-button operation and has performance-boosting features that make it better than pneumatically powered alternatives in improving efficiency and productivity. These are features found across all the signode battery powered sealers.


Some of the main advantages of using the Grip Pack 114 Sealer are as following:

  • Lightweight tool that weighs just 8 lbs
  • Ergonomic, one-hand use design for reducing operator fatigue
  • There are no pneumatic air lines to deal with
  • Higher consistency than pneumatic tools and delivers more secure seal every time
  • Highly durable signode battery powered sealers

Repair & Accessories

All the accessories for the Signode Grip Pack 114 Sealer are readily available for order along with the tool. You can choose the right accessory to increase efficiency and make the tool easier to use.

Besides, tool repair services are also available from experienced and certified technicians. The heavy-duty battery tool can be repaired and returned within a short turnaround. As all parts are readily available, the tool can be repaired quickly. You can also place order for its common wear parts.